Skip to main content

Android-Powered, Automated Cat Feeder

This is my Android-powered, automated cat feeder:


The attached HTC Magic is running SL4A and provides scheduled and on demand feeding as well as an MJPEG webcam feed. Feeding is triggered via Bluetooth. The Arduino is hooked up to a SparkFun BlueSMiRF and a simple relay circuit I made on perfboard for powering the motor on and off.


The brackets and food chute were designed in SketchUp and printed on my MakerBot. You can find all the SKPs, STLs, schematic, and parts list on Thingiverse.

Here's the 50 odd lines of Python code running on the phone via SL4A that make the magic happen:
import android # See http://android-scripting.googlecode.com/
import gsd  # See http://getshitdone.googlecode.com/
import socket
import threading
import time

def feed(droid):
  droid.toggleBluetoothState(True)
  droid.bluetoothConnect('00001101-0000-1000-8000-00805F9B34FB', '00:06:66:04:b2:07')
  droid.bluetoothWrite('f')

class Server(gsd.App):
  def __init__(self, droid, webcam_url):
    self._droid = droid
    self._webcam_url = webcam_url

  def GET_(self, response):
    response.Render("""<html>
  <head>
  <title>Cat Feeder</title>
  </head>
  <body>
  <img src="%s">
  <br><a href="/feed">Feed!</a>
  </body>
  </html>""" % self._webcam_url)

  def GET_feed(self, response):
    feed(self._droid)
    response.Redirect('/')

def timer(droid):
  feedings = [4, 10, 20]
  last_feeding = None
  while True:
    hour = time.localtime().tm_hour
    if hour in feedings and hour != last_feeding:
      feed(droid)
      last_feeding = hour
    time.sleep(300)

def GetIpAddress():
  s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) 
  s.connect(('google.com', 0))
  return s.getsockname()[0]

def main():
  droid = android.Android()
  droid.wakeLockAcquirePartial()
  webcam_url = 'http://%s:%d/' % tuple(droid.webcamStart(5, 80).result)
  server = Server(droid, webcam_url)
  port = 8080
  base_url = 'http://%s:%d/' % (GetIpAddress(), port)
  threading.Thread(target=server.Serve, args=('0.0.0.0', port)).start()
  threading.Thread(target=timer, args=(droid,)).start()
  droid.notify('Cat Feeder', 'Running on: %s' % base_url)
  
if __name__ == '__main__':
  main()
And here's the Arduino code:
int relayPin = 13;
int portionSize = 10000;

void setup() {
  Serial.begin(115200);
  pinMode(relayPin, OUTPUT);
}

void loop() {
  if (Serial.available() > 0) {
    Serial.read();
    digitalWrite(relayPin, HIGH);
    delay(portionSize);
    digitalWrite(relayPin, LOW);
  }
}
This project was inspired by the Internet-Enabled Cat Feeder - Mark 2.

Popular posts from this blog

Email Injection

Not so long ago, I ran a wiki called SecurePHP. On that wiki, there was one particular article about email injection that received a lot of attention. Naturally, with all the attention came lots of spam. As a result, I disabled editing of the wiki and content stagnated. Still, the email injection article remained popular. About a year later, the server that hosted SecurePHP died and I never had a chance to hook it all back up. I saved the article though and I'm reposting it now. It may be a bit old (I've been away from PHP for a long time), and I didn't write all of it, so feel free to leave comments about needed updates and corrections. Though this article focuses on PHP, it provides a lot of general information regarding email injection attacks. The PHP mail() Function There are a lot of ways to send anonymous emails, some use it to mass mail, some use it to spoof identity, and some (a few) use it to send email anonymously. Usually a web mailform using the mail() funct
Read more

XBee ZNet 2.5 Wireless Accelerometer

I managed to put together a wireless accelerometer the other night using my two new XBees, an Arduino XBee shield, an XBee Explorer USB, an ADXL330, and some Python. I struggled a bit with some of it, so here's what I learned: First, a parts list. XBee 2mW Series 2.5 Chip Antenna Arduino XBee (with XBee Series 2.5 module) XBee Explorer USB ADXL330 I'm not sure exactly what the specs are on the XBee that comes with the Arduino shield. But, it is definitely a series 2.5. The first thing to do is to configure and upgrade the firmware on your XBees. To do that, you'll need X-CTU (for the firmware upgrade at least, but it's also nice for configuration) which, unfortunately, is only available for Windows. But, it works fine from VMware. First up, the XBee we'll hook up to the computer to read incoming data from the accelerometer: Plug one of the XBees into the Explorer (it's also possible to do this from the Arduino shield by shifting the two XBee/USB jumpers to USB
Read more

Android Recipes and Snippets

I've put together a small collection of Android recipes. For each of these recipes, this is an instance of Context (more specifically, Activity or Service ) unless otherwise noted. Enjoy :) Intents One of the coolest things about Android is Intents . The two most common uses of Intents are starting an Activity (open an email, contact, etc.) and starting an Activity for a result (scan a barcode, take a picture to attach to an email, etc.). Intents are specified primarily using action strings and URIs. Here are some things you can do with the android.intent.action.VIEW action and startActivity() . Intent intent = new Intent(Intent.ACTION_VIEW); // Choose a value for uri from the following. // Search Google Maps: geo:0,0?q=query // Show contacts: content://contacts/people // Show a URL: http://www.google.com intent.setData(Uri.parse(uri)); intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK); startActivity(intent); Other useful action/URI pairs include: Intent.ACTION_DIAL , tel://867530
Read more